puff extruder machine-manufacture,factory,supplier from China

For extruder equipment, the model specifications of extruder equipment are classified according to the diameter of the screw. For the sake of explanation, plastic is used as an example below, but the same is true for food extruders.That is to say, the screw diameter of the extruder equipment is the model specification of the extruder equipment. For example, the screw diameter of the 90-type extruder equipment is 90mm.

　　The puff snack extruder has two pairs of screws that mesh with each other and rotate in the same direction. They jointly play the roles of conveying, friction extrusion and heating. The materials are input by the principle of positive displacement for forced conveying, and pressure backflow is rarely formed.　　Thus, the problem in this respect on the single screw extrusion extruder is better solved, and strong conveying. puff snake extruder integrates compression, mixing, mixing, shearing, melting, sterilization, expansion, molding and other functions, and is completed in a very short time.

Feed extruder is a single screw extruder. Mainly used for food puffing, livestock feed or used for puffing single raw materials, but also as a plant oil and drinking wine production of raw materials in the pre-place. Twin-screw extruding extruder, mainly used for the production and processing of high-grade aquatic products, pet materials, especially the processing of viscous materials.What are its characteristics?1.

Series double screw extruder introduction:1, mainly by the feeding system, extrusion system, rotary cutting system, heating system, lubrication system, control system.2, extruder feeding system, main drive system, rotary cutting system all adopt frequency control, strong power, smooth operation, power saving.3, automatic lubrication, forced cooling, to ensure the safe operation of the extruder and prolong the life.4, screw alloy material, through special processing, high strength, wear resistance, increase the service life.5, according to different products, with different structure and length

When operating a twin-screw extruder, it should be maintained on time. The maintenance process is carried out after the twin-screw extruder runs continuously for 2500-5000h and shuts down. The screw is extracted to inspect, measure and identify the wear condition of the most critical components, replace the components that have reached the specified wear limit as soon as possible, and repair the damaged components . The maintenance standard of the reducer of the twin-screw extruder is the same as that of the ordinary standard reducer.

　　The product produced by the puff snack production line is a kind of extruded snack. It uses advanced co extrusion technology to extrude two kinds of products with different texture and taste on a twin-screw host at the same time to produce popular McChicken pieces, sandwiched rice crisps, rice nuts and other puffed sandwich foods in the market. It can also change molds and auxiliary equipment to produce Breakfast cereal Congee, nutritional powder and puffed snack food of various shapes.

Directly puffed food is generally required to be dried after extrusion processing. The moisture content of the dough in the extruder is 15%~20%. The product is then dried to reduce the moisture content to 2% to 3% to create the environment needed for a crunchy texture and stable shelf life. Due to the low density of the product, the drying time is usually very short, so it should be carried out in a warm warehouse.Coatings to produce direct-expanded products Extruded and dried products are finally sprayed with oils and seasonings.

Food extruder has a service life, and good maintenance measures in the process of use can ensure that the machinery can be used for a longer time.1. When it is found that the spiral groove is blocked, do not stop the machine immediately. It should run for a moment after stopping the feed, until there is a burnt taste. This can prevent the nozzle, spiral sleeve bite. If the nozzle, screw sleeve bite can not be removed, do not hit hard, it can be removed from the body, put in the fire for a moment, you can remove.2.

After pre -processing the materials are crushed, wet, mixed, and preheated, the driving force of the squeezing screw is used to form a specially designed mold hole to form a certain shape and organizational state, which is called extrusion processing.The basic principle of squeezing and puffed is: grain raw materials containing a certain amount of water, sealed in the patch machine, for heating, pressurizing or mechanical effects, so that the material is in a high temperature and high pressure state.

　　Before you get a food extruder, make sure you do your homework on the machine you’re buying so you can get the most out of it. Consider these things before you buy an extrusion machine.Type Of Extruder:　　Piston extruders, roller-type extruders, and screw extruders are the 3 kinds of extruders commonly used to make packed food products, with the latter being the most common.　　For food processing, you should determine if you require a single-screw extruder or a double-screw extruder.