Precautions for cleaning food extruders

Screw extruder is a kind of screw food extrusion equipment. The working process of the equipment is: the conveying screw pushes the material entering the material box into the compression screw through the increase of the pitch and shaft diameter of the compression screw, so that the liquid (juice) contained in the material is removed by the resistance of the screen wall and the cone. Extrusion, the extruded liquid flows out from the sieve hole and is concentrated in the juice hopper, and the squeezed pomace passes through the ejector between the end of the sieve cylinder and the cone. The rear of the cone is equipped with a spring to discharge resistance And the size of the slag discharge port can be changed by adjusting the preload and position of the spring, which is used to adjust the dryness and humidity of the extrusion.

The screw extruder can be used to separate fermented grape skin residue, ginger, spinach, rubber, Chinese herbal medicine, winter jujube kitchen waste and other solid-liquid containing certain fiber or viscous macroscopic world substances, so as to extract fruits and vegetables containing certain fiber. It is also used for continuous juicing to remove twigs or small amounts of twigs. Its mesh is specially made according to the size of sea buckthorn.

Screw extruders are very focused on quality, and good equipment will last longer than some cheap ones, but that doesn't mean we don't need repairs.

Before operating the screw compressor, a simple experimental process can be done to confirm that there is no problem with continuous large-scale processing, but special attention should be paid to selecting a suitable distance stage and sampling according to the specified amount. After the screw compressor is used, special attention should be paid to cleaning the equipment. If there are many internal residues, you can also try to clean it with resin solvent. When cleaning, pay special attention to the maintenance of rubber distance, and pay special attention to the internal conditions of the equipment when cleaning, which is also beneficial to the long-term application of the screw compressor and proves our rights.

It is recommended that when the device starts to use, it is necessary to check whether the device has a self-cleaning function. Many smart devices have a cleaning function, so daily cleaning is also very simple.

In addition to cleaning the screw extruder, the equipment should be strictly inspected at regular intervals. During daily use, workers should be encouraged to continuously investigate the equipment to see if there are certain problems and abnormal noises, and problems should be dealt with in time. , to prevent bigger problems.