Русский
日本語
한국어
Francés
العربية
Deutsch
Español
Português
हिन्दी
اردو
bahasa Indonesia
বাংলা
Ελληνικά
ไทย
Türk
Việt
1. Before operating the corn equipment bulking machine, remove the head, movement, lead screw and other parts, clean them up, dry them and then install them.2. Idling for 1 to 2 minutes first when operating, put the raw materials into the feed mouth, not too fast, when the ring groove of the spiral…
2023/02/17 09:04
Indirect puffed snack foods are also known as "third generation snack foods". The production of these foods has a common characteristic: they are not puffed directly after coming out of the extruder template. Additional processing steps are required to give it the appearance or texture, which…
2023/02/15 09:30
Direct puffed snack food is a very widely consumed food, they are used by the type of extruder characteristics known as corn fruit. In recent years, this type of food is called direct puffed food. Typically, direct puffing foods are produced on high shear cooking extruders. This type of product is…
2023/02/15 09:19
Bulking process is also a process of shaping dog food raw materials. The forming process in the form of steam will add water, so that the dog food raw starch gelatinization, temperature to 100 degrees Celsius -180 degrees Celsius, because the extrusion pressure is very big, extrusion instant…
2023/02/02 11:33
Main parts and componentsScrew: is the main component of the bulking machine, indicating the parameters of the screw structure are diameter, pitch, root diameter, spiral Angle and blade section structure. The length to diameter ratio of extruded parts and the gap between the screw and the inner…
2023/02/02 10:35
Feed extruder is a single screw extruder. Mainly used for food puffing, livestock feed or used for puffing single raw materials, but also as a plant oil and drinking wine production of raw materials in the pre-place. Twin-screw extruding extruder, mainly used for the production and processing of…
2023/02/01 13:22
Extruder belongs to a kind of equipment for processing puffed food. It is a kind of equipment for processing puffed food, such as processing rice, corn, soybean, wheat, etc., in daily life. Its main working principle is the conversion of mechanical energy into heat energy, the heat generated by the…
2023/02/01 10:01
Puffed food extruder still has a lot of nutritional value for many raw materials processing, but many need to pay attention to the puffing process, to master the time required for its control, as well as temperature and humidity need to consider the only way to maintain the stability of product…
2023/01/31 14:54
Food puffing machinery production line mainly uses potato starch, corn starch, flour as raw materials, using a unique extrusion molding process, the production of the popular market of various shapes of the secondary puffed food. Mechanical production line design is reasonable, high degree of…
2023/01/31 13:40
Extruded small food production, usually in starch raw materials with a small amount of water mix, with extruder continuous pressure heating (such as 30 ~ 40 kg/cm2, 140℃), so that the raw materials from the nozzle extrusion, and make it rapidly expanded, and then according to the need to cut off,…
2023/01/30 16:24
The biggest difference between pure handmade food and the food produced on the assembly line lies in the supervision of food safety. The food on the assembly line has a complete supervision system to ensure the safety of various links such as the sanitary conditions of food production, raw material…
2023/01/30 10:24
Fresh ingredients are fed into a 3D printer and dishes are created, a futuristic technology that is now a reality. The combination of delicious food and 3D printing technology has subverted people's cognition of traditional dining habits.Meat and Livestock Australia says 3D meat printing is still a…
2023/01/29 21:51
Submitted successfully
We will contact you as soon as possible
Close