Notes for operating corn extruder

1. Before operating the corn equipment bulking machine, remove the head, movement, lead screw and other parts, clean them up, dry them and then install them.

2. Idling for 1 to 2 minutes first when operating, put the raw materials into the feed mouth, not too fast, when the ring groove of the spiral shaft head is filled, stop feeding, friction preheating. Wait until the nose temperature rises and the pressure inside the cabin builds up before feeding.

3. Feed should be continuous and uniform, material must be dry, must pay attention to.

4. When the spiral groove is blocked, do not immediately stop the machine, idling for a while, and then stop the machine when you smell the burnt taste, which is mainly to prevent the nozzle and the spiral sleeve from biting.

5. After the operation is over, let the corn equipment puffing machine idling for 1 minute after the feeding is stopped, and stop the machine after draining all the materials in the machine. Then remove the nozzle and spiral sleeve while it is hot, flush out the spiral shaft, remove the residue in the machine, dredge the jet hole for reuse.

Working principle

Using the extruding and pushing of the non-equidistance non-standard screw system of the extruding machine, the gas in the material is discharged and quickly filled by the material. The material is produced by the shearing force and the backflow, so that the pressure in the chamber increases. With the friction between the pile and the chamber, the material is fully mixed, squeezed, heated, glued and gelatinized and the organization changes, and the original structure is destroyed.

At present, the company has just completed the new extended version, the new entrepreneurial project, which can be driven by gasoline engine and diesel engine by the motor, and the finished product wall is thin and crisp.

Jinan DAYI Machinery Technology Co., Ltd. is located in the beautiful city of Jinan. The company has been engaged in the research and development of food production line machinery and production technology for a long time, the company's standard production technology, the operation concept of automatic control, and the focus on the development of stable and reliable production equipment. The company's designers have long-term experience in design, development, debugging and production, and have responsible on-site engineering personnel engaged in production and debugging work, and can provide you with standardized design, production, and debugging processes.