Snack Products Bugles Shaper

Equipment Introduction Of Snack Products Bugles Shaper:

This machine is a supporting equipment of Double screen Snack Production Extruder, which is mainly used for forming and cooling three-dimensional compound extruded food. Materials enter the Snack Products Buckles Shaper from the cooling guide frame for composite. The machine is made of stainless steel, and the welded junction has been specially treated, so it has beautiful luster.

The machine has reasonable design, compact structure and convenient operation, and can meet the requirements of different parameter states of customers.

In addition, in order to better connect with the next equipment, an extension conveyor is equipped at the discharge end of the Snack Products Buckles Shaper, so that the materials can be effectively transported to the next equipment with better continuity.

Schematic Diagram Of Equipment Structure:

1.Triangle compound machine 2.Output conveyor

Snack Products Buckles Shaper Installation Instructions:

1. According to the position of the production line, arrange the Snack Products Buckles Shaper before the discharge of the double screen Snack Production Extruder host, and place the equipment in a ventilated and dry place.Select a flat and solid ground, and make sure that the foundation is firmly placed to prevent uneven force on each part of the machine body from affecting the normal operation of the equipment.

2. After fixing the Snack Products Buckles Shaper, push the low end of the extended conveyor into the snack equipment.

3. Knife switch shall be installed for power supply of each equipment, and the equipment shall have reliable grounding protection.

4. Switch on the power supply and operate the machine with no load. Observe whether the machine operates normally.