Correct use of puffed food machinery and equipment

When the puffed and extruded food machine is operating, we must first think about a problem, that is, how to use the food extruder correctly in the process of using the machine, so I will explain the suitable processing method for novices.

1. When it is found that the spiral groove is blocked, do not stop the machine immediately, it should run for a while after stopping the feeding, and then stop the machine when there is a burning smell. In this way, the nozzle and the screw sleeve can be prevented from being seized. In case the nozzle and the screw bushing are bitten and cannot be removed, do not knock them hard, but remove them from the body and burn them in the fire for a while, then they can be removed.

2. In the early stage of the operation, when the nozzle hole cannot spray the formed product, it is often caused by the temperature of the nozzle being too high. The reason is that the raw material is too dry, or there is foreign matter in the spiral groove, or the feeding is interrupted. The reasons should be found according to different situations. Troubleshoot.

3. After the operation is over, stop feeding, let the machine idle for 1 minute, and stop the machine after draining the material in the machine.

4. Before the operation, the working parts such as the machine head, the movement, and the lead screw should be removed, and the rice scale and oil stains on the movement and the lead screw should be carefully cleaned, and then dried and reassembled after cleaning.

5. When using, start the machine for 1-2 minutes first, then slowly add the raw materials into the feeding port, and when about a handful of raw materials can fill the ring groove of the screw shaft head, stop feeding and carry out friction preheating. When the temperature of the standby head rises, the pressure in the machine cavity increases, and the nozzle starts to eject, then the material is fed. Since the machine cavity has not reached the normal temperature and pressure at this time, the feeding amount should be gradually increased slowly.

6. The feeding should be continuous and uniform, and the material should be dry, otherwise the spiral groove will be easily blocked.

Jinan DAYI Machinery Technology Co., Ltd. is located in the beautiful city of Jinan. The company has been engaged in the research and development of food production line machinery and production technology for a long time, the company's standard production technology, the operation concept of automatic control, and the focus on the development of stable and reliable production equipment. The company's designers have long-term experience in design, development, debugging and production, and have responsible on-site engineering personnel engaged in production and debugging work, and can provide you with standardized design, production, and debugging processes.